C型鋼經熱卷板冷彎加工而成，壁薄自重輕，截面性能優良，強度高，與傳統槽鋼相比，同等強度可節約材料30%。但是很多消費者對其都不是很了解，接下來就為大家詳細介紹一下濟南彩鋼瓦c型鋼結構的厚壁質量控制是怎樣的。

C-section steel is made by hot coil cold bending. It has thin wall, light weight, excellent section performance and high strength. Compared with traditional channel steel, the same strength can save 30% of material. But many consumers don't know much about it. Next, let's introduce in detail the thick wall quality control of Jinan color steel tile C-steel structure.

濟南彩鋼瓦c型鋼結構廣泛用于鋼結構建筑的檁條、墻梁，也可自行組合成輕量型屋架、托架等建筑構件。此外，還可用于機械輕工制造中的柱、梁和臂等。

Jinan color steel tile C-type steel structure is widely used in purlin, wall beam of steel structure building, and can also be combined into lightweight roof truss, bracket and other building components. In addition, it can also be used for columns, beams and arms in light industry.

1、不同的用戶對c型鋼壁厚有不同的要求。如果要同時滿足這些要求，所選擇的c型鋼生產工藝和設備是非常關鍵的。一般情況下，冷軋生產c型鋼比較困難，應采用c型鋼機加工。

1. Different users have different requirements for the wall thickness of C-beam. If we want to meet these requirements at the same time, the selected C-beam production process and equipment is very critical. Generally, it is difficult to produce C-beam by cold rolling, so C-beam machining should be adopted.

   
   

2、材料從c型鋼機尾部進入后，通過各種滾輪壓下，成型的c型鋼從頭部輸出。這不僅很好地優化了必要的生產過程，而且增加了產量。保證了剖腹產產品壁厚均勻，界面形狀復雜。

2. After the material enters from the tail of the C-beam machine, it is pressed down by various rollers, and the formed C-beam is output from the head. This not only optimizes the necessary production process, but also increases the output. It ensures the uniform wall thickness and complex interface shape of caesarean section products.

3、為了達到準確的壁厚，在壓c型鋼時，c型鋼機所使用的上模和某些相同的尺寸，下模的尺寸和尺寸。為了在加工前安裝到位，不僅要保證上下模具的順利工作，還要保證周圍間隙均勻，使壓出的c型鋼的壁厚均勻。

3. In order to achieve accurate wall thickness, when pressing C-beam, the upper die used by C-beam machine and some of the same size, the size and size of the lower die. In order to install in place before processing, it is necessary not only to ensure the smooth operation of the upper and lower molds, but also to ensure that the surrounding clearance is uniform, so that the wall thickness of the extruded C-beam is uniform.

4、在加工濟南C型鋼的過程中，安裝模具并測試主機。然后啟動空壓機、真空泵、擠出機、切磚機、給料機、壓磚機、主機、輸送機。停止時，先停止擠出機，然后停止設備的其余部分。

4. In the process of machining Jinan C-beam, the mould was installed and the main machine was tested. Then start the air compressor, vacuum pump, extruder, brick cutter, feeder, brick press, main machine and conveyor. When stopping, stop the extruder first, and then stop the rest of the equipment.

5、使用本設備前，應檢查連接是否牢固，安裝螺栓、螺母是否擰緊，左、右底盤加足潤滑油后方可進行發動機電試。擠出機擠出的坯料由切割機切割成一定的長度，再由滾筒輸送機運至壓磚機，再由裝載機按規定的程序運至下模。工位上用c型鋼機壓出的毛坯分度后，由卸磚機的真空吸盤吸去，分度后放置在輸送線的毛坯支架上。

5. Before using the equipment, check whether the connection is firm, whether the mounting bolts and nuts are tightened, and add enough lubricating oil to the left and right chassis before the engine electrical test. The billet extruded by the extruder is cut into a certain length by the cutter, and then transported to the brick press by the roller conveyor, and then transported to the lower die by the loader according to the specified procedure. The blank pressed out by the C-beam machine on the working position is divided and sucked by the vacuum suction cup of the brick unloader. After dividing, it is placed on the blank support of the conveying line.

6、采用這種方法生產的c型鋼，其壁厚可以非常薄，大大簡化了生產過程，提高了生產效率。它能生產各種平均壁厚但截面形狀復雜的彩鋼冷彎設備，這些是普通熱軋方法難以生產的

6. The wall thickness of C-beam produced by this method can be very thin, which greatly simplifies the production process and improves the production efficiency. It can produce all kinds of color steel cold bending equipment with average wall thickness but complicated cross section shape, which are difficult to produce by ordinary hot rolling method

上述內容就是今天為大家分享的關于濟南彩鋼瓦c型鋼結構的厚壁質量控制是怎樣的的全部內容，希望對大家能有所幫助，想要了解更多內容可以電話聯系我們或者關注我們的網站，我們的工作人員會及時與您取得聯系，期待您的來電。

The above content is today for you to share about Jinan color steel tile C steel structure thick wall quality control is how all content, hope to help you, want to know more content can call us or pay attention to our website, our staff will get in touch with you in time, looking forward to your call.