1. Prepare for high-frequency welding of T-shaped steel stiffness, welds, etc., so that the entire steel can achieve harmony rather than highlighting a single function.

2、重視型鋼的焊接順序，比如先焊主要焊縫在焊次要焊縫或先焊收縮量大的等等，制定合理的焊接順序使整個流程能夠有條不紊的進行。

2. Pay attention to the welding sequence of section steel, such as welding the main weld before welding the secondary weld or welding with large shrinkage, etc. Develop a reasonable welding sequence to ensure that the entire process can proceed in an orderly manner.

3、對于一些尺寸較大的型鋼，可以通過分段、分層、間斷施焊等方法，再實施這幾種方法時，要對高頻電流的頻率、速度等進行控制，應使其一直處于相同的狀態。

3. For some large-sized steel sections, methods such as segmented, layered, and intermittent welding can be used. When implementing these methods, the frequency and speed of high-frequency current should be controlled to keep them in the same state all the time.

4、若是大型型鋼構件出現不對稱現象，那么先要將組成它的型鋼進行校正，再進行裝配焊接，保證整體穩定性。焊接時常進行反動能有效的使變形相互抵消。

4. If a large section steel component exhibits asymmetry, the section steel that makes up it must be corrected first, and then assembled and welded to ensure overall stability. Frequent reactions during welding can effectively counteract deformation.

預防肯定是比事后解決要好的方法，它可以從本質上將問題扼殺在搖籃中，掐滅那些苗頭，既方便又實用。所以不要抱著等問題出現再去解決的心理，說不定到那時就會發現已經晚了。

Prevention is definitely a better method than solving problems afterwards. It can essentially nip problems in the bud and nip out those signs, which is both convenient and practical. So don't hold onto the mentality of waiting for problems to arise before solving them, perhaps you will find out it's already late by then.

以上就濟南型鋼廠家為大家介紹的內容，感謝您在百忙之中查看我公司的信息內容 http://www.yuancloud.cn，如果您想要了解的更多，歡迎您來電進行咨詢!

The above is the introduction of Jinan section steel manufacturer for everyone. Thank you for taking the time to check our company's information content http://www.yuancloud.cn If you want to learn more, welcome to call for consultation!