樓承板在安裝過程中，固定環節須使用螺釘，螺釘在固定環節中起著重要的作用。以下是用螺釘固定濟南樓承板的注意事項。

During the installation of the floor bearing plate, the fixing link must use screws, which play an important role in the fixing link. The following are precautions for fixing Jinan floor bearing plate with screws.

在螺釘旋緊時，施力均勻，用力不能過安全扭力值。保持螺釘和螺母的中心軸垂直于被鎖面，不要傾斜，減少偏轉角度。擰緊螺釘時，應選擇扭矩扳手或套筒扳手，以避免過度用力，并將控制扭矩控制在安全庫存扭矩范圍內。在高溫下使用時冷卻，使用時不要快速旋轉，以免溫度快速上升導致鎖定。

When the screw is tightened, the force shall be applied evenly, and the force shall not exceed the safe torque value. Keep the central axis of the screw and nut perpendicular to the locked surface, do not tilt, and reduce the deflection angle. When tightening screws, torque wrench or socket wrench should be selected to avoid excessive force and control the torque within the range of safety stock torque. It shall be cooled when used at high temperature. Do not rotate quickly when using to avoid locking due to rapid temperature rise.

1、旋緊螺絲的過程中，施力有必要均衡，用力不得大于安全扭力值;

1. In the process of tightening the screw, the force should be balanced, and the force should not be greater than the safe torque value;

2、保持螺絲、螺帽的中心軸線與被鎖面平直，千萬不能呈現歪斜，減少偏轉視點；

2. Keep the central axis of the screw and nut straight with the locked surface, and do not skew it to reduce the deflection viewpoint;

3、樓承板廠家告訴你，在高溫狀態下運用時有必要冷卻，同時在運用時切勿快速旋轉，避免溫度快速上升從而呈現鎖死情況；

3. The floor bearing plate manufacturer tells you that it is necessary to cool down when operating at high temperature, and at the same time, do not rotate rapidly during operation to avoid the rapid rise of temperature and thus the situation of locking;

4、咱們應選用扭力扳手或套筒扳手來旋緊螺絲，切勿用力過大（將控制扭力控制在安全庫存扭矩范圍內）。

4. We should choose a torque wrench or socket wrench to tighten the screw, and do not use too much force (control the torque within the range of safety stock torque).

樓承板具有杰出的延展性，所以運用不當就很容易導致螺絲與螺母無法旋開，呈現鎖死的現象。所以咱們在運用螺絲固定樓承板應該注意以上的相關注意細節，更多的事項就來我們網站http://www.yuancloud.cn進行咨詢！

The floor bearing plate has excellent ductility, so it is easy to cause the screws and nuts cannot be unscrewed due to improper use, presenting the phenomenon of locking. So we should pay attention to the above details when using screws to fix the floor bearing plate. For more details, please visit our website http://www.yuancloud.cn Consult!