在使用的過程中，在懸臂條件下，樓承板僅作為永久性模板。懸挑的長度可根據樓承板的截面特性來定。為了防止懸挑板的開裂，需在支座處依結構工程師的設計配上負筋。

In the process of use, under the condition of cantilever, the floor bearing plate is only used as a permanent template. The cantilever length can be determined according to the cross-section characteristics of the floor bearing plate. In order to prevent the cantilever slab from cracking, the bearing should be reinforced according to the design of the structural engineer.

樓承板擱置在鋼梁上時應防止探頭。鋪料時操作人員應系安全帶，并保證邊鋪設邊固定在周邊安全繩上。 焊接采用熔透點焊連接，施焊前應準備邊角料引弧試焊，調整施焊電流。

When the floor bearing plate is placed on the steel beam, the probe should be prevented. When laying, operators should wear safety belts and ensure that they are fixed on the surrounding safety ropes while laying. Penetration spot welding is adopted for welding. Before welding, it is necessary to prepare leftover materials for arc striking test welding and adjust welding current.

在進行建筑的過程中，樓承板是一種非常重要的一種輔助材料，而且有著非常重要的作用，主要用作永久性模板，也可被選為其他用途。壓型板表面壓紋使樓承板與混凝土之間產生大的結合力，使二者形成整體，配以加勁肋，使樓承板系統具有高強承載力。

In the process of construction, floor bearing plate is a very important auxiliary material, and has a very important role. It is mainly used as permanent formwork, and can also be selected for other purposes. The embossing on the surface of the profiled plate makes the maximum binding force between the floor bearing plate and the concrete, and makes them form a whole. The floor bearing plate system has high bearing capacity with stiffeners.

因樓承板底部無水平模板及垂直支撐，澆筑混凝土時布料不宜太集中，采用平板振搗器及時分攤振搗。產品廣泛用于電廠、電力設備公司、汽車展廳、鋼結構廠房等工程中，如果您有產品需要，歡迎了來電進行咨詢。

Because there is no horizontal formwork and vertical support at the bottom of the floor bearing plate, the distribution should not be too concentrated when pouring concrete, and the plate vibrator should be used to vibrate in time. The products are widely used in power plants, power equipment companies, automobile exhibition halls, steel structure plants and other projects. If you need products, you are welcome to inquire.